Hand plate manufacturers for you to analyze the hand plate and the first plate five differences

The hand board and the head board are basically the same in essence, but there are some differences.

Both the hand plate and the head plate belong to the engineering model sample. That is, in the early stages of new product development, what are the differences between the actual products made by referring to computer simulations? Let's take it a step further.

The term handban comes from the early 1990s, from Baodao Taiwan into the mainland.

As the original industry is relatively backward, more than 90% of its technology needs to rely on manual completion. It is mainly divided into clay hand board and plaster hand board. Only simple tools, but requires rich and exquisite craftsmanship, so the cost is very high, the production cycle is quite long. At that time, the hand plate can only roughly reflect the body of the product, the colorful process is difficult to be expressed.

The first plate, in a simple sentence to summarize is the first or first batch of new product sample, because it is "the first" so called the first.

With the rapid development of science and technology, industrial products change with each passing day, people's living standards continue to improve, the appearance and function of the product requirements are more and more harsh, so that the industrial design and the first board industry to bring a piece of vitality. Relying on the original manual technology to make the first board is unable to meet the current development needs of jue. Today's first board is mainly divided into: CNC first board and SLA laser rapid prototyping.

SLA rapid prototyping, that is, photocuring stereoscopic modeling, this technology takes photosensitive resin as raw material, and scans the liquid resin point by point and layer by layer with the contour trajectory of each layer of predetermined parts under the control of computer ultraviolet laser, so that the thin layer of resin in the scanned area generates photopolymerization reaction and solidifies into shape. Its main disadvantage is that the material strength is not enough, electroplating, oil injection and other surface treatment effect can not meet the requirements of mass production, so SLA laser rapid prototyping is gradually fading out of the first plate market.

CNC first plate is the use of computer program control of high precision CNC engraving and milling machine processing product shape and internal structure, accuracy can be controlled in :100MM±0.10MM, straight spindle fast moving speed up to 40m/min, both in precision and processing speed can greatly meet customer needs, is also the most common, the most widely used production method.

The most important is CNC first plate in the choice of materials is very wide, such as: ABS, PC, PMMA, POM, PU and so on, even aluminum alloy, copper, stainless steel can be smoothly carved and milling out, from this point of view, "hand plate" is incomparable. Today's Shenzhen first plate manufacturers only rely on mechanization is difficult to complete the complete set of first plate production, but also need to rely on exquisite manual technology, manual is mainly used for surface treatment of these late links: trimming, Angle cleaning, polishing, painting, etc. With the combination of mechanization and handwork, the first plate produced is almost more beautiful than the mass-produced products on the market. Thus also greatly meet the requirements of product designers.