CNC four-axis processing safety rules:

1. It is necessary to follow machining center safe operation procedures.

2. Before operation, according to the regulations, we should wear protective equipment, tie cuffs, scarves, gloves, ties and aprons are prohibited. Women's braids should be pulled in the hat.

3. Check whether tool compensation, machine zero, workpiece zero, etc., are correct before starting.

4. The relative position of each button should meet the operation requirements. Carefully prepare and input the numerical control program.

5. To check the equipment on the protection, insurance, signal, orientation, cnc machining machine transmission part, electrical, hydraulic, digital display and other systems, in all normal conditions can be machining.

6. Before processing the machine tool test work, should check the lubrication, mechanical, electrical, hydraulic, digital display and other systems of operation, in all normal conditions can be machining.

7. After the machine tool enters the processing operation according to the program, the operator is forbidden to touch the moving workpiece, the tool and the transmission part, and stop the transmission or taking things across the rotating part of the machine tool.

8. Parking is necessary when adjusting machine tools, clamping workpieces and tools, and scrubbing machine tools.

9. Things or other articles shall not be placed on electrical appliances, operating cabinets and protective covers.

10. It is forbidden to remove iron scraps directly by hand, and special things should be used to clean.

11. Find abnormal situation and alarm signal, should immediately park, cnc hand processing please check the relevant personnel.

12. It is forbidden to leave the working position when the machine tool is working. When it is necessary to leave the machine, the working table is placed in the middle position, the tool bar is returned, it is necessary to park and cut off the power supply of the main engine.